NEGATIVE WATER PROOFING SYSTEMS

SRL announce launching of 'NEGATIVE WATER PROOFING SYSTEMS' FIRST TIME IN INDIA.

NEGATIVE WATER PROOFING
Normally, water proofing is done by stopping the source of water, whether outside or inside the building, which carries water in to the walls and this is normally stopped by putting tar-felt or through polymeric coatings, depending on the condition & location of seepage point.

SRL also has got a method of polymeric coatings as well as Polyfelt system to stop water, coming through external source. Normally you will have a problem, when you can not identify the source and you need  to stop your walls from moisture. Because of the water seepage, your costly paints peels-off & the rooms looks very dirty and shabby. Besides this the moisture brings a bad smell, which is un- hygienic. By using the method of SRL, the water from outside source can not enter your room or wall. This type of water proofing, in a real sense, is the NEGATIVE WATER PROOFING.

SRL's RECOMMENDATIONS

Step-1 :  First POP and Cement plastering has to be removed to reach to the Brick wall.

Step-2 : The Brick wall should be coated with our TOPCOAT- PU MC. Two
coats should be given at an interval of 6 hours in crisscross pattern.

Step-3 : The cement plastering should be done with C-MAX of SRL in the ratio of 1% of Cement, i.e. 500 grams C-MAX per Bag of cement.

Step-4 : POP should be done on the wall after curing and then in place of Cement primer, WHITE KNIGHT- 6050, diluted with MTO or Kerosene in the ratio of 1:1 may be used as Primer. Above this, any other coating may be provided.

This will give complete Water Proofing, even if there is a substantial seepage of water in the wall.

Contact Us | Disclamair

02 Sreechem Resins Limited
Last modified: January 13, 2003