|
| |
SOLUTION OF RISING WATER DAMP
Normally, wherever, the water level is very
low, the water is soaked through the Brick walls and through the Bricks, it
comes on the wall and destroys the painting. Our solution to such Rising damp is
as under.
-
Plastering from the wall is removed
totally.
-
Bricks are dried by either a Blower or
putting a hot Blower.
-
After the wall is dried, one coat of Black
Coat or TOPCOAT (WS) is applied.
-
After drying of above coating, two coats of
WHITE KNIGHT are given (You may also use our TOPCOAT- RED/Black) at this
place.
-
After the coating is completely dried,
plastering is to be done putting CARBOBOND @ 1% of the Cement in the Mix.
-
Please cure the plastering with water.
-
Room will be totally damp free.
|