Home Up Business Enquiry Ask Us Feedback Search

TOPCOAT PU MC

TOPCOAT -  SFG
ONE PACK PU SYSTEM

DATA SHEET & METHOD OF USE

This is a chemical and heat resistance material, up to a temperature of 180°C, suitable for application by brush or spray. It is an excellent coating for corrosion resistance, insulation & damp walls etc. Coating achieved with this PU is externally hard and is resistance t oil, alkali, alcohol, salt, water, sulphuric acid solution up to 30% concentration level (24 hours).

It is strongly recommended for coastal areas, where the humidity levels are very high and some times, it goes up to 90-95% and no other coating takes the grip, because of invisible salt deposit on the structures. This coating will protect the structures, steels and equipments in Oil Refineries, Solvent Chemical Industries and Onshore structures, which are subjected to severe saline conditions and where the problem is proper drying and curing of the polymer, after being coated.

This coating is resistance to Aggressive corrosion. though micron build up is between 15-25 microns. Depending on the base surface and the spraying conditions, this coating dries in presence of moisture and attains strength.

Colour : Transparent
Finish : Glaze
Flash Point : Above 30°C.
Pot life : Once you open the tin, it is advisable to consume it.
For this reason only, this is supplied in 200ml. & 500 ml. tins only
Method of Application : Conventional spray.
Temperature Resistance : 180°C.
Theoretical coverage : 20 sq.mtrs. per liter.
Coverage with loss factor 20% : 16 sq.mtrs. per liter.
Coverage with loss factor 30% : 14 sq.mtrs. per liter.
Coverage with loss factor 40% : 12 sq.mtrs. per liter.
Dry Film thickness : Transparent - 15 - 25 microns
% Volume solid : 32%+
Drying Time : Surface Dry - 15 to 30 minutes
Hard Dry - 3 hours
Full Cure - 24 hours
Recotability Time : Not less than 60 minutes
Interval before overcoating : 60 minutes
Thinner : Insulthin Universal
 
Storage life : Twelve months, if the tin is not opened and is kept in sealed condition.
Packing : 500ml

Precautions of applying SRL Coatings

Contact Us | Disclamair
02 Sreechem Resins Limited
Last modified: January 13, 2003